Latest MiniMotoClubWales News.
Latest MiniMotoClubWales News.
|
| MMCW · Chat room |
 Help
 Search
 Members
 Calendar
|
| Welcome Guest ( Log In | Register ) | Resend Validation Email |
|
|
   |
problem, help...| meecham |
Posted: September 01, 2006 03:27 pm
|
 MMCW  Group: Members Posts: 763 Member No.: 482 Joined: August 06, 2006  |
 ive just started me minimoto cause i was bored and it wudnt start so i adjusted the idle screw on the carb and started fine then petrol started leekin from a pink tube from the engine wen i turn the fuel off it stops leakin then i turn it bak on then it leeks again anyone no how to stop this and wat i dun to make it happen ??????? |
  
|
| Pr][nCe |
Posted: September 01, 2006 04:16 pm
|
 Moderator Group: Admin Posts: 2329 Member No.: 8 Joined: March 29, 2005 |
it sounds like you fuel shutoff valve is not working "stuck open", you need to remove the bottom of the carb usually 4 screws, then take out the float by removing the pin then under there you will see the valve, thats operated by the float when full it shuts it off if there is any obstruction it cant close, make sure your in a good clean and well vetelated area as there will be fuel spilage... do not force or bend anything or you will be in trouble, little parts very fragile take care and best of luck...
--------------------  ..05 GRC RR Super 6 Port BZM 50cc 12+hp Not Std anymore ;)....05 GRC RR 4.2....Pritty Fly For A Fat Guy.. |
|
| goodfellowracer |
Posted: September 01, 2006 04:40 pm
|
 MMCW Full Member Group: Members Posts: 701 Member No.: 123 Joined: October 03, 2005 |
its ure overflow i got the same bike as u all i dun was take the bottom of the carb off took the float out cleaned it all then put it bak in
--------------------  |
|
|
| declan |
Posted: September 01, 2006 04:50 pm
|
 MMCW Full Member Group: Members Posts: 590 Member No.: 181 Joined: February 26, 2006 |
lol cags r the shitest thing to have i gt 1 and the only gd thing on tht is the pait job
 -------------------- Derbi Sender 50
 |
|
|
| meecham |
Posted: September 02, 2006 03:03 pm
|
|
MMCW Group: Members Posts: 763 Member No.: 482 Joined: August 06, 2006 |
t5hanx ill give it a try and hopefully i wunmt break it and dec ure rite ure paint job is nice lol
|
|
|
| meecham |
Posted: September 07, 2006 09:19 pm
|
|
MMCW Group: Members Posts: 763 Member No.: 482 Joined: August 06, 2006 |
thanx guys i fixed it all now just neeed a trackday at llandow now lol
 |
|
|
0 User(s) are reading this topic (0 Guests and 0 Anonymous Users)
0 Members:
 |
|
